It basically consists of:
- Strong loading frame with a reading cell built into the piston
- Hydraulic Servo-Plus Evolution Touch-Screen system, for the data acquisition, control and processing. The whole is built in a console.
The frame is designed to carry out tensile tests using the grips placed in the clamping heads. In the upper part, between the head and traverse, it is possible to carry out flexion, compression, bending, hardness, dishing tests, according to the International Standards by using the suitable devices. The hydraulic servocontrolled unit regulates the load rate by the Computer. An emergency device stops the machine in any moment as per the International Safety Standards. A control pedal situated on the frame governs the movement of the lower tensile head (excursion 0 to 580 mm with electric end of stroke switches) for an easier positioning of the specimen according to its length.
The machine is supplied complete with loading frame, control console, while the software (mod. H009), extensometers (mod. H014 to H014-10) grips and the printer are options and must be ordered separately according to the needs of the user.
Technical Specifications
Capacity: 600 kN
Max. crosshead stroke: 200 mm
Max. distance between the jaws: 465 mm
Width flexion joke: 190 mm
Max. flexion knives distance: 1000 mm
Compression plates light: 235 mm
Load reading: Sensing by loading cell. Resolution 0.01% U.V.
Accuracy: Class 1 EN 10002-2
Only reading scale 1:1-1:20 U.V.
Stroke reading: Sensing by linear transducer Resolution 0,01 mm
Deformation reading: Sensing by electronic extensometer (accessory) Resolution 0.001 mm
Accuracy: Class B 2 (B 1 for base up to 50 mm) ASTM E83
Needed height: 4050 mm
Frame weight: 2600 kg approx.
Rack dimensions: 610x630x1600 mm
Power supply: 230V 1ph 50Hz 2kW
Accessories for H003N:
Round and flat grips. One set consists of two double pairs that must be placed into the upper and lower tensile heads.
H003-03 Set of Grips for Flat specimens from 2 to 18 mm and Round specimens Ø 5...12 mm
H003-04 Set of Grips for Flat specimens 18...36 mm
H003-07 Set of Grips for Round specimens from Ø 12...24 mm
H003-08 Set of Grips for Round specimens from Ø 25...40 mm