Field Density Sand Replacement Method
S234-10-KIT Kum Konisi Test Seti
Standards: ASTM D1556, AASHTO T191, NF P94-061-3, CNR N.22, UNE 7371
Used to determine the in-situ density of fine graned compacted soil and to verify the degree of compaction.
The test consists in digging a hole into the ground and then collect, dry and weight the sampled soil.
The hole is now filled with dry sand from the cone container and the volume of sand recorded.
Three versions are available Ø 4” 6.5” 12” each one suitable for different grain sized.
The S231KIT model Ø 12” is recommended for coarse grained soil and gravel (over 38 mm diameter).+
The kit consists of:
Metal double cone assembly with valve, galvanized for rust protection.
Metal base with rimmed centre hole for cone housing, galvanized.
Two plastic jar, 5 litre capacity. (One jar only 15 litre capacity complete of cone fixing device for S231 KIT version)
The calibrating container is an accessory, to be ordered separately.
| Model |
Diameter inch/mm |
Double cone with valve |
Metal base with hole |
Jar plastic |
Dimensions mm |
Weight kg |
Calibration Container (optional accessory) |
| S234-10 KIT |
4”(101.6 mm) |
S234-11 |
S234-12 |
V121 (2) |
190x190x500 |
2.300 |
S234-13 |
| S234 KIT |
6.5”(165.1 mm) |
S234-05 |
S234-06 |
V121 (2) |
305x305x600 |
3.350 |
S234-01 |
| S231 KIT |
12”(304.8 mm) |
S231-05 |
S231-06 |
S231-11 (1) |
620x620x920
|
13.600 |
S231-01 |
Note: all parts can be purchased individually.
Accessories:
S235N Standard sand for density tests, passing 600 micron and retained on 300 micron. ASTM, AASHTO, BS.
Bag of 25 kg.
S235-01N Standard sand, passing 0.4 mm and retained on 2 mm. CNR N°22. Bag of 25 kg