The relative density set is proposed in two versions according to EN or ASTM Specifications:
S238N-KIT Relative Density of Cohesionless Soils – Vibrating Table Method
Standard: EN 13286-5
This test covers the determination of the maximum dry density and the water content (humidity/density ratio) of cohesionless mixtures where the max density by the impact method is lower than the
vibratory method.
The method is applicable to materials containing up to 12% fines (< 0.063 mm) by mass and max. particle size is 80 mm.
The test is performed to road construction mixtures.
The set is composed of:
S238-10 Vibrating electromagnetic table, dimensions 762x762 mm, vibration frequency 3600 rpm, amplitude range: 0.05 to 0.64 mm, max. load capacity 250 kg, complete with separate
control panel.
Power supply: 230V 1ph 50-60Hz
S238-11EN Relative density mould 14 liters capacity with accessories.
S238-12 Surcharge weight and base with handle to EN for the 14 liters mould.
Total weight: 290 kg approx.
S238-01N-KIT Relative Density of Cohesionless Soils – Vibrating Table Method
Standartlar: ASTM D4253, ASTM D4254+
The method is applicable for the determination of the relative density of cohesionless soil where impact compaction will not produce a well defined moisture/density relationship curve.
The maximum density of the impact test is normally less than the vibratory method.
The set is composed of:
S238-10 Vibrating electromagnetic table, as above described.
Power supply: 230V 1ph 50-60Hz
S238-11N Relative density mould 0,5 cu. ft. capacity with accessories.
S238-13N Relative density mould 0,1 cu. ft. capacity with accessories.
S238-14N Surcharge weight and base with handle to ASTM for the 0.5 cu. ft. mould.
S238-15N Surcharge weight and base with handle to ASTM for the 0.1 cu. ft. mould.
S238-16 Relative density gauge measuring set.
Total weight: 310 kg approx.
Accessory:
S238-17 Pouring devices Ø 12.5 and 25 mm