Standards: EN 13286-47, ASTM D698, D1557, D1883, AASHTO T99, T180, T193, BS 1377:4, 1990, 1994 NF P94-093, P94-066, DIN 18127, UNE 7365, 7255, 103-501-94, CNR UNI 10009, CNR N. 29, 69, DUTCH RAW, AS 1289 and most International Standards.
Designed to compact Proctor and CBR specimens, it ensures an extremely uniform compaction degree, granting reliable and repeatable test results. The microprocessor software allows to select and perform different compaction cycles in a fully automatic system, by strictly meeting the mentioned International Standards. The blows are automatically distributed as requested by the selected Standard, with turntable rotation and rammer displacement through photoelectric cell sensors and microprocessor. Top quality components and high accuracy mechanical workings grant very long life also under intensive utilisations. The digital control panel is separate from the machine and it can be fixed to the wall or mounted on a bench. The high resolution graphic display (blue negative) 320x240 pixels visualizes selected Standard, total number of blows, effected and remaining ones to end the test, and execution of each layer. The compactor is easy to use, friendly menu driven, versatile, of simple and practical maintenance. The user can select and memorize up to 10 personalized test cycles, that can be later on modified or replaced by other ones. This is a very important function, because it allows to update the Compactor to new Standards, or any Standard not included in the microprocessor, or for research purposes. The original lift system of the rammer can be selected at 12” or 18”, or at 300 or 450 mm, granting a correct and constant fall height. Rammer drop speed: 1 blow each 2 seconds. The compactor accepts moulds having Ø 4” and 6”, 100 and 150 mm, all producers, thanks to its universal mould fixing system. The machine is supplied without rammers to be ordered separately and selected according to the desired Standard (rammers are interchangeable). Not sellable in CE markets.
Accessories:
S199-06 Standard Rammer Ø 50 ± 0.2 mm and 2500 ± 10 g weight
S199-07 Modified Rammer Ø 50 ± 0.2 mm and 4535 ± 5 g weight
Modified rammer are hardened for wear resistance.
Standards: EN 13286-47, BS 1377:4, DIN 18127, UNE 7255, 7365, UNE 103-501-94
or,
S199-08 Standard Rammer Ø 50.8 ± 0.13 mm and 2491,25 ± 1.25 g weight
S199-09 Modified Rammer Ø 50.8 ± 0.13 mm and 4537 ± 3 g weight
Modified rammer are hardened for wear resistance.
Standards: ASTM D558, ASTM D559, ASTM D698, ASTM D1557, ASTM D1883, NF P94-066/93, CNR UNI 10009, CNR N. 69, AASHTO T99, AASHTO T180, AASHTO T193
or,
S199-13 Standard Rammer, Ø 50 ± 0.4 mm and 2700 ± 10 g weight
S199-14 Modified Rammer, Ø 50 ± 0.4 mm and 4900 ± 10 g weight
Modified rammer are hardened for wear resistance.
Standard: AS 1289 (Australian) Standard.