Gyromec is an electromechanical gyratory compactor. The load is applied by an electro-mechanical cylinder with a load cell positioned directly on the vertical actuator for precise load measurement. To simulate and reproduce the kneading and compaction action of concrete mixes in precast production lines according to NT build 427. Useful for both quality control of concrete as well as in research and product development.
The machine is provided with dedicated firmware according to NT Build 427, which can also be customized for specific requests.
Rigid steel frame ensuring excellent angle control.
Full color 7” touch screen control unit, running like a standard PC.
Software for PC control data acquisition and processing.
Electronic angle positioning.
Collecting pan to prevent possible dispersions of slurry and water.
- Compacted specimen size: Ø 100 and 150 mm; height from 0 to 200 mm for both sizes.
- Mould dimensions: internal Ø 100 mm and Ø 150 mm; height 250 mm for both moulds.
- Adjustable from 0 to 3° (preset in factory to 2° 17’’ according to NT build 427).
- Number of cycles (gyratory): adjustable from 1 to 5000.
- Gyration rate: adjustable from 5 to 60 work cycles/min.
- The vertical pressure on the specimen is automatically controlled and adjusted by the electronic system.
- Applied pressure: up to 1000 kPa for Ø 150 mm specimen, up to 2300 kPa for Ø 100 mm specimen.
Power Supply: 230V 1ph 50-60Hz 1000W 12A
Dimensions: without worktop 640x505x1420 mm with worktop 640x860x2140 mm
Weight: without worktop 280 kg, with worktop 370 kg
Accessories
B041-08 Hardened Specimen Cylinder Ø 100 mm with holes, complete with bottom plate
B041-09 Hardened Specimen Cylinder Ø 150 mm with holes, complete with bottom plate
B041-11 Top Penetration Piston Ø 100 mm
B041-12 Top Penetration Piston Ø 150 mm
B041-13 Metallic Disc for Ø 100 mm moulds. Pack of 2
B041-14 Metallic Disc for Ø 150 mm moulds. Pack of 2
B041-17 Hollow Punch to stabilize and to mature the sample Ø 100 mm
B041-18 Hollow Punch to stabilize and to mature the sample Ø 150 mm
B030-05 Filter Paper for Ø 100 mm moulds. Pack of 100
S200-14 Filter Paperfor Ø 150 mm moulds. Pack of 100
B041-21 Wheels(kit of 4) with brake, for an easy handling of the Compactor in the laboratory
B041-30 Vertical Force Testing Device with load ring
As alternative:
B041-31 Vertical Force Testing Device with digital dynamometer.
B041-33 Kit of 2 Distance Pieces of 105 and 115 mm height for the control of the height values measured by the linear transducer
S337-52 ACCREDIA official vertical load calibration certificate
B041-23 Pneumatic Automatic Specimen Extruder
Or
B045-23 Electromechanical Automatic Specimen Extruder
B041-26 Balance Integrated into the worktop, to facilitate the sample and the mould weightings, by avoiding the stress of lifting them.
The weighing reading values are directly and automatically displayed on the control panel of the compactor.
Capacity: 30 kg, accuracy ± 6 g
Or
B041-27 Bench for lateral bearing of a weighing balance