Standards: EN ISO 376, EN 10002-3 Class 2, ASTM E74 Class A
These load cells are suitable for the calibration of compression testing machines.
They consist of a high quality steel block, named sensitive element, where some strains have been fitted: the whole is housed in a stainless steel sheathing.
While the load is applied, strains are transmitted to an amplifier (mod C138N) which gives a load digital reading.
Further advantages is the possibility to equip different load cells on the same measuring tester and therefore to check all load capacities.
Full Scale nominal output: 2 mV/V
Linearity + Hysteresis: ± 0.3% of full scale
Repeatability: ± 0.03% of full scale
CLASS: A
| Model |
Capacity kN |
Dimensions Ø x height mm |
| C149 |
25 |
82 x 59 |
| C140-01 |
50 |
82 x 59 |
| C140-02 |
75 |
82 x 59 |
| C140-03 |
100 |
82 x 59 |
| C140-04 |
300 |
135 x 160 |
| C140-05 |
600 |
135 x 160 |
| C140-06 |
1000 |
135 x 200 |
| C140-07 |
2000 |
135 x 200 |
| C140-08 |
3000 |
135 x 200 |
| C140-09 |
5000 |
180 x 200 |
| C140-10 |
500 |
for tensile tests |
For professional use (calibration laboratories, Metrology Institutes, etc.), models with higher accuracy and accuracy are also available.